Type: | Microfluidic |
---|---|
Component: | SemiConductor Type |
For: | Pipeline Microfluidic Pressure |
Output Signal Type: | Digital Type |
Production Process: | Integration |
Material: | Plastic |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
PAS07xx is a pipeline microfluidic pressure sensor, which can be controlled by CAN network, or output pressure value through an analog interface.
This series of sensors adopts a special liquid circuit design, has the smallest liquid retention, and has a high pressure sensitivity. A special filter is integrated inside, which can filter and compensate for pressure deviation, temperature drift, and nonlinearity.
Suitable for pipeline pressure monitoring of various analytical instruments and laboratory equipment. ,Solve the problems of air suction, needle blockage, clot, overpressure burst pipe, etc. in the liquid path, and can also be used to distinguish different density media in the pipeline.
General | PAS0700 series |
Host | PC PLC MCU |
Development environment | VC C# Labview VB Linux Python |
Supply voltage | DC7-30V |
Output trigger | Digital level |
Measurement accuracy | +/-2%Fspan |
Full-range temperature drift | +/-0.03%FS |
Response speed | 2ms |
Detection channel | 1 |
Temperature range | -10 ºC to 70 ºC |
Durability | Over 20,000 hours |
Interface | |
Analog type | VCC: Dc power supply,7-30V GND: Ground AN: Analog voltage output |
RS485 type | Updating |
CANbus type | Updating |
Communication | |
Protocol | CANopen DS301 |
Baud rate | 5K-1Mbps |
Dimensions |
We offer a one-year warranty and a lifetime after-sales service.
After your purchase, we will send you a user manual and debugging tools.
You can email us anytime if you have any questions about wiring, debugging, limit setting, command sets or offline programs.
You can also make a video call with us via WhatsApp to quickly solve your problem.
We will do our best to help you, wish you a happy purchase!
Q: What is your advantage?
A: Our controller is integrated with drive and control, small, powerful, and space-saving.
Q: What is the difference between driver and controller?
A: The normal driver can only receive pulses, you also need to buy a controller to send pulses to it.
Q: Do I need an adapter for your controller?
A: Yes, you need a Canopen bus or Modbus adapter. We recommend our PCAN-mini can adapter, it can be an alternative to the original Peak adapter.
Suppliers with verified business licenses