| Customization: | Available |
|---|---|
| Type: | Capacitive Pressure Sensor |
| Component: | Integrated Circuit |
|
Still deciding? Get samples of US$ 64/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The PCS07xx is a controller that integrates capacitive sensors and pressure sensors, which can not only detect liquid triggers by programmable capacitive sensing, but also judge whether the pipeline is blocked and leaking through the change of pressure value, and the two systems can operate independently. Both capacitance and voltage values can be converted into intuitive data outputs, and triggering can be determined by status bit changes and LEDs.
The PCS07xx provides a simple and fast control command set, which can be connected to the control host via CAN, in a small size, cost-effective, one model, two uses, and a simple and flexible interface.
It is suitable for reagent level detection and container level detection of various medical, environmental protection and laboratory instruments.
| General | PCS07XX series |
| Host | PC PLC MCU |
| Development environment | VC C# Labview VB Linux Python |
| Supply voltage | DC9-24V |
| Output trigger | Digital level |
| Capacitance detection accuracy | 10fF |
| Capacitance detection range | 0-2.5nf |
| Pressure detection accuracy | +/-2%Fspan |
| Pressure detection range | +/-10kpa(Customizable) |
| Response speed | Capacitive: microseconds Pressure: 2ms |
| Detection channel | Capacitive:2 Pressure:1 |
| Temperature range | -40 ºC to 80 ºC |
| Durability | Over 20,000 hours |
| Interface | |
| J1 | VCC: DC power supply,9-24V GND: Ground CANH: CAN Bus high line CANL: CAN Bus low line TR:5V Trigger signal output, can be configured with high and low level trigger |
| J2 | Capacitance channel 2 interface |
| J3 | Capacitance channel 1 interface |
| J4 | Pressure channel interface |
| Communication | |
| Protocol | CANopen DS301 |
| Baud rate | 5K-1Mbps |
| Dimensions |
We offer a one-year warranty and a lifetime after-sales service.
After your purchase, we will send you a user manual and debugging tools.
You can email us anytime if you have any questions about wiring, debugging, limit setting, command sets or offline programs.
You can also make a video call with us via WhatsApp to quickly solve your problem.
We will do our best to help you, wish you a happy purchase!
Q: What is your advantage?
A: Our controller is integrated with drive and control, small, powerful, and space-saving.
Q: What is the difference between driver and controller?
A: The normal driver can only receive pulses, you also need to buy a controller to send pulses to it.
Q: Do I need an adapter for your controller?
A: Yes, you need a Canopen bus or Modbus adapter. We recommend our PCAN-mini can adapter, it can be an alternative to the original Peak adapter.
){kind=link}